The Al Fakher Ultra 25000 Puffs is a high-capacity disposable vape designed for long-lasting performance. It typically includes features like a rechargeable battery, mesh coil system, LED display, and large e-liquid capacity (around 22ml), allowing up to 25,000 puffs depending on usage.

Despite its advanced design, it can still develop issues over time. The good news is that many of these problems are minor and can be fixed safely at home with simple steps.

This guide covers all common problems and how to fix them step by step.

1. Device Not Hitting (No Vapor at All)

This is the most common issue users face.

Possible Causes:

• Battery is dead
• Airflow blocked
• Auto-draw sensor not activating
• Internal wiring issue

How to Fix It:

✔ Check the LED Screen or Light

Most Al Fakher Ultra devices have an LED indicator:

• No light → battery likely dead
• Light on but no vapor → coil or airflow issue

👉 If there is no light, start by charging the device.

✔ Charge the Vape Properly

This vape is rechargeable via Type-C.

Steps:

• Plug into a standard charger
• Charge for 30–60 minutes
• Avoid fast chargers (they can damage the battery)

Low battery is the most common reason the vape stops working.

✔ Clear Airflow Holes

Airflow blockage prevents activation.

• Locate small holes at the bottom
• Use a toothpick or pin to gently clean them
• Blow lightly through the mouthpiece

Even a tiny blockage can stop the sensor from working.

✔ Take a Stronger Puff

The device uses an auto-draw system:

• Slow, deep inhale works best
• Weak puffs may not trigger it

2. Weak Vapor Production

If your vape produces vapor but it’s very weak, the issue is usually related to power or airflow.

Causes:

• Low battery
• Airflow restriction
• Coil not heating properly
• Cold environment

Fixes:

✔ Fully Charge the Device

Even if the vape still works, low battery reduces power output.

✔ Check Airflow Again

Restricted airflow = weak vapor.

• Clean holes and mouthpiece
• Make sure fingers aren’t covering airflow

✔ Warm the Device

Cold temperatures thicken e-liquid:

• Hold the vape in your hands for a few minutes
• Do NOT use a heater or microwave

✔ Let It Rest

If you’ve been vaping continuously:

• Coil may be overheated
• Wait 5–10 minutes before using again

3. Burnt Taste Problem

A burnt taste is one of the most common issues with high-puff disposables.

Causes:

• E-liquid nearly empty
• Coil burnt
• Chain vaping
• Dry wick

Fixes:

✔ Stop Using Immediately

Continuing to vape will permanently damage the coil.

✔ Let the Wick Re-Saturate

• Leave the device unused for 10–15 minutes
• Allows e-liquid to soak back into the coil

✔ Avoid Chain Vaping

Taking many puffs in a row:

• Dries out the wick
• Causes burning

✔ Recognize End-of-Life Signs

• Constant burnt taste
• Low vapor
• Harsh hits

👉 If these happen together, the vape is likely finished and cannot be fixed.

4. Device Charging but Not Working

Sometimes the vape charges normally but produces no vapor.

Causes:

• Coil failure
• Internal disconnection
• Sensor issue

Fixes:

✔ Tap the Device Gently

• Tap lightly against your palm
• May reconnect loose internal parts

⚠️ Do not hit it hard—this can damage the battery.

✔ Try Different Puffing Styles

• Longer, slower inhale
• More consistent airflow

✔ Check Charging Cable

• Try a different USB-C cable
• Use a different power source

5. Gurgling, Spitting, or Leaking

If you hear bubbling or get liquid in your mouth, the device is likely flooded.

Causes:

• Excess e-liquid in coil
• Temperature changes
• Improper storage

Fixes:

✔ Blow Through the Mouthpiece

• Hold tissue at the bottom
• Blow gently to clear excess liquid

✔ Clean the Mouthpiece

• Use tissue or cotton
• Remove visible liquid

✔ Store Upright

• Prevent leakage
• Avoid placing it sideways or upside down

6. Auto-Firing (Activating by Itself)

Sometimes the vape activates without you inhaling.

Causes:

• Liquid inside airflow sensor
• Internal moisture

Fix:

• Blow gently through airflow holes
• Let device sit for a few minutes to dry
• Avoid over-inhaling

7. Airflow Problems

Tight Airflow (Hard to Pull)

Fix:

• Clean airflow holes
• Check for blockages
• Ensure fingers aren’t covering vents

Loose Airflow (Too Airy)

Fix:

• Slightly cover one airflow hole while puffing
• Adjust draw technique

8. LED Display Issues

The Al Fakher Ultra often includes a display showing battery and e-liquid levels.

Problems:

• Screen not working
• Incorrect readings
• No light

Fixes:

✔ Charge the Device

Most display issues are due to low battery.

✔ Restart by Letting It Sit

• Leave unused for 10–15 minutes
• Try again

✔ If Display Is Completely Dead

• Internal circuit may be faulty
• Replacement is the only option

Final Thoughts

The Al Fakher Ultra 25000 Puffs is a powerful, long-lasting disposable vape with advanced features like a rechargeable battery, mesh coil, and LED indicators.

Most issues—such as weak vapor, airflow blockage, or minor flooding—can be fixed easily with simple steps like cleaning, charging, or resting the device. However, problems like a burnt coil or empty e-liquid usually mean the device has reached the end of its lifespan